InSite® Heat Activated
- Ready to use — No mounting tissues or films needed
- Designed for use in mechanical or hot vacuum presses and heated roll laminators
- Neutral pH heat activated (HA) adhesive
- Bonds at 160°F in 15 – 45 seconds in a mechanical press; 160°F in 4 minutes in a hot vacuum press; and 280°F – 290°F at a speed of 1-1/2 to 3 feet per minute using a hot roll laminator.
- Manufactured in the USA
- Heat tolerant paper
- Poster images
- RC photographs
InSite® Heat Activated (HA) foamboard features an extruded polystyrene foamboard with clay coated liners, one of which is a smooth clay-coated paper on one side and neutral pH heat activated (HA) adhesive on the other. Heat activated foamboards are designed for use in mechanical and hot vacuum presses as well as heated roll laminators. Since InSite® HA board comes with a layer of smooth, evenly applied adhesive coating it is ready to use out of the case by eliminating the need for rolled mounting tissues or films. This saves both production time and money, whether a single custom mount or large production operation.
Available in white and black, 1/8″ to 3/16″ thicknesses and sizes from 24″x 36″ to 48″x 96″.
InSite® HA bonds at 160°F in 15 – 45 seconds in a mechanical press; 160°F in 4 minutes in a hot vacuum press; and 280°F – 290°F at a speed of 1-1/2 to 3 feet per minute using a hot roll laminator. Available in either white or black versions, it is ideal for heat tolerant paper, newspaper, poster images and RC photographs.
Gilman Brothers MountCor® HA foamboard should be selected whenever dependable, safe, low 130°F temperature is required for mounting any digital image on paper.
Gilman Brothers MountCor® Canvas HA foamboard–with its low 130°F temperature–safely and permanently bonds any digitally printed canvas media, synthetic media, or polyester encapsulation for framing or display.