BENEFITS:

  • Available in High-Tack or Low-Tack adhesion
  • Cold pressure-sensitive adhesive surface
  • No heat required
    Use manually with a soft rubber roller or hard plastic squeegee, or in a cold vacuum frame or cold roller laminator
  • Available in white and black

 

IDEAL FOR:

  • Art Posters
  • Photographs

 

DOWNLOAD RESOURCES:

Instructions - InSite® Self Adhesive

Framing & Wall Decor Options

 

Proprietary Reveal® Foam Center

 

InSite® Self Adhesive is an extruded polystyrene foamboard featuring the proprietary Reveal® memory foam center faced on one side with smooth, clay-coated paper and either Low-Tack (green liner) or High-Tack (black liner) cold pressure-sensitive adhesive surface on the other, covered by a protective release liner.

 

Available with Low-Tack or High-Tack Adhesive

 

InSite® Self Adhesive Low-Tack has a repositionable adhesive allowing for multiple placement prior to bonding. Once desired alignment is achieved, finalize the bond by activating with a plastic squeegee or rubber roller; place in a cold vacuum frame; or feed through a cold roller laminator. If mounting manually and not using the aid of a roller, place the mounted print under weight during the first few hours while adhesive cures for best results.

 

InSite® Self Adhesive High-Tack is an aggressive adhesive that immediately grabs to smooth paper and photo media so correct placement the first time is essential. Once applied, manually burnish, place in cold vacuum frame, or feed through cold rollers–as above–to fully activate the adhesive.

 

Manual application is quick and easy with simple peel-and-stick use.

InSite® Self Adhesive features our Reveal® memory foam center faced on one side with smooth, clay-coated paper and a Low-Tack  or High-Tack cold pressure-sensitive adhesive surface on the other, covered by a protective release liner.

 

STANDARD COLORS:

Black and White

GAUGE: 3/16”

SIZES:

Min: 24” x 36”

Max: 48” x 96”