Styrene-Faced Foamboard

  • 2.5 Times the Density of Competing Foams
  • Perfect for Digital Printing
  • Smooth surface requires less ink
  • 3D Cold Bend Capability
  • Superior Performance on digital cutting equipmnt like ZÜND®
  • Cleanest Surface — No pre-cleaning needed
  • 22% Less Weight
  • Part of the ColorOne™ White Point Management System
  • 100% Recyclable
  • Manufactured in the USA using 100% USA produced raw materials
  • Largest Sizes Available — 60” x 192” 


  • 3D POP Displays 
  • Digital & Screen Printing
  • Exhibits & Kiosks
  • Digital & Knife Cutting
  • Framing
  • Routing & Die Cutting
  • Fabrication
  • Tradeshow Booths
  • Signage

Superior Cutting & Routing plus 3D Cold-Bendability 

INFINITY®‘s high end foam cuts cleaner and 30% faster on digital cutting equipment like ZÜND®.

(Cutting guidelines for ZÜND® and other digital equipment are available on our Downloads page)

INFINITY® is a 100% styrene, bendable board which can be printed, shipped flat, then cold bent to set up into a 3D presentation, or even wrapped around a pole.  INFINITY® weighs 22% less, making it lighter to handle, lighter to ship!

All of this makes it the perfect board for screen printing, shipping, visual merchandising, trade show and point-of-purchase displays.

Smoothest Printing Surface

INFINITY® is made with a proprietary digital grade styrene surface which eliminates post production cleaning or any additional preparation prior to printing which increases printing speed, efficiency and profits. There are modifiers that have been added to the styrene that promote ink adhesion and the foam has 2.5x the density of other competitive foams. Our smoother surface means 7% less ink is required for complete coverage.  Less production cost!

Part of the ColorOne™ White Point Management System

INFINITY®’s surface sheets that maintain their color under incandescent, fluorescent or ultraviolet light. INFINITY® is part of the Gilman Brothers ColorOne™ White Point Management System. ColorOne ensures optimum printing performance and consistency across all Gilman Brothers board products of direct-printable foamboard and specialty graphics board by matching the surfaces of the board by their degree of whiteness. Surface liner materials and coatings have been carefully selected to derive consistent white balance and optimum surface properties for printing, truly making the printed colors accurate when exact match of logos is vital.

ColorOne™ link

100% Recyclable, Made in the USA

Gilman Brothers launched INFINITY® in October 2014 and continues to change the printing industry: first with the board, then easel, recyclable displays and now a 3mm thickness, developed as an alternative to Sintra® and Komatex®. INFINITY® 3mm is the only green, 100% recyclable product–in this category of EPVA–making it the logical choice over any other expanded PVC. AND it is 100% manufactured in the USA using 100% USA produced raw materials

Min: 3mm
Max: 1”
Min: 16” x 20”
Max: 3/16″ – 1″ x 60” x 192”
         3mm x 48″ x 192″ 
3-D COLD BENDABILITY made our drums a hit!

3-D COLD BENDABILITY – Print, ship flat, then set up on site!

With 1/2" Black INFINITY® and a digital router, the creative possibilities are endless!

With 1/2″ Black INFINITY® and a digital router, the creative possibilities are endless!

BUILD IT BIG! INFINITY® is sturdy enough to build big POP displays!

BUILD IT BIG! INFINITY® is sturdy enough to build big POP displays!

For additional information: call us at 800-852-4220; email us at; or order samples from the link below.

Click Here for INFINITY® Online Sample Order Form