InSite PSA

InSite® Self-Adhesive

Pressure-Sensitive Adhesive Foamboard

InSite® Self Adhesive features our Reveal® memory foam center faced on one side with smooth, clay-coated paper and a Low-Tack or High-Tack cold pressure-sensitive adhesive surface on the other, covered by a protective release liner.

BENEFITS:

  • Available in High-Tack or Low-Tack adhesion
  • Cold pressure-sensitive adhesive surface
  • No heat is required. Use manually with a soft rubber roller or hard plastic squeegee, or in a cold vacuum frame or cold roller laminator
  • Available in white and black

IDEAL FOR:

  • Art Posters
  • Photographs

STANDARD COLORS:

Available in white or black

GAUGE:

3/16″

SIZES:

Min: 24″ x 36″

Max: 48″ x 96″

Resources:

Instructions-InSiteSA
Framing-and-Wall-Decor-Options

InSite® Self Adhesive is an extruded polystyrene foamboard faced with a cold pressure-sensitive adhesive on one side and moisture-resistant clay-coated paper on the other.

High-Tack and Low-Tack Adhesive Options: InSite® Self Adhesive offers both High-Tack and Low-Tack cold pressure-sensitive adhesive options. Choose from the repositionable Low-Tack or the more aggressive High-Tack adhesive — both offer quick and easy manual peel-and-stick application, without heat or expensive equipment.

InSite® Self Adhesive Low-Tack: InSite® Self Adhesive Low-Tack (green protective release liner) has a repositionable adhesive allowing for multiple placements before bonding.

Once the desired alignment is achieved, finalize the bond by activating with a plastic squeegee or rubber roller; place in a cold vacuum frame; or feed through a cold roller laminator. If mounting manually and not using the aid of a roller, place the mounted print under weight during the first few hours while the adhesive cures for best results.

InSite® Self Adhesive High-Tack (black protective release liner) is an aggressive adhesive that immediately grabs to smooth paper and photo media so correct placement the first time is essential. Once applied, manually burnish, place in a cold vacuum frame, or feed through cold rollers–as above–to fully activate the adhesive.

 Proprietary Reveal® Foam Center: Engineered with our exclusive foam center, the InSite® Reveal® retains its thickness while delivering exceptional performance.

Back to top